PAGEV has put the plastics to shape the tools of the future into the agenda: High performance, competitive price, design and safety as well as durability, fuel efficiency and carbon emission minimized environmental characteristics are added to vehicle designs produced today. The only material that provides low carbon emissions in response to high performance and fuel economy by reducing weight is plastic. Turkish Plastic Industry Congress discussed with experts and sector representatives. Thanks to the plastic parts, the vehicles are lightened by the 11. This reduces fuel consumption between 50 and 25. Every kilogram of equipment decayed means less carbon dioxide emissions per kilogram of 35. PAGEV, acting with the mission of ü Smooth environment ”in all of its works, also signed the AG Operation Clean Sweep (OCS) çevre protocol which was implemented in the congress with the partnership of Plastic Industry Association and American Chemistry Council.
Today, the 20 of a car is made of plastics. In addition to the vehicles used in road transport, plastics also have a higher place on the agenda of airline companies. The Turkish Plastic Industry Research, Development and Education Foundation (PAGEV), which set off from the role of plastics in transportation vehicles, is the 11. At the Turkish Plastic Industry Congress, he examined the latest developments in the sector.
xnumx's per cent of the total weight in the production of motor vehicles in Turkey is produced from plastic. On average, this amount corresponds to 12 in the car, 90 in the bus, 15 in the minibus and minibus, 10 in the truck and 91 in the truck. Plastic parts are lighter than the 40 percent compared to other parts, saving fuel consumption in percent of 50 to 25. As the vehicles become lighter, their load on nature is also decreasing, because the 35 kilogram lightness means less carbon emissions than 1 kilograms.
In our country, 2015 has created 5 of automotive plastics. The average rate of plastic in each car produced last year rose to 11,8. The production of motor vehicles in Turkey and in the renewal request xnumx't last year 2015 5 percent increase compared to the amount of plastic material used in the total weight rose to 52 thousand tons. In the areas where plastic products are mainly used, 418 has the highest share in the interior cladding, while 19 seats the seats with 12; them bumper, hood bottom, flooring, front console, lighting and fuel systems followed.
The use of plastic in aircraft and trains is increasing not only for vehicles used in road transport. Nowadays, small private planes and the bodies of new generation passenger aircraft are produced from fiber-reinforced plastic composites similar to fiberglass. These materials are lighter and more durable than metal parts and 20 provides fuel savings. Another advantage is the fact that the volume of the passenger's cabin is reduced to a minimum and the 80 reduction of the sound compared to the classic airplanes is increasing. Thus, plastics; less fuel consumption, less maintenance and operation costs, more environmentally friendly, quieter, non-stop long-haul flights and cheaper passenger tickets. Thanks to all these design and efficiency features, the plastic usage rate in the aircraft industry is 1970 in 4, but now it is up to 30. It is projected to increase to 50 in a short period of time.
The Turkish Plastic Industry Congress, organized by the Turkish Plastic Industry Research, Development and Education Foundation (PAGEV), which aims to draw attention to the fact that the most effective solution to the ever-growing and increasing demands of the transportation industry will be provided by plastic applications, this year yeni The Future of Transportation Vehicles Ulaşım ; Plastics discussed the theme dı. During the congress held at Hilton Istanbul Bomonti Hotel, the advantages of plastic used in transportation vehicles and technological developments in the sector were discussed with all dimensions.
experts from Turkey and abroad, industry representatives and academics came together in Congress; aviation sector in Turkey, and the future of automotive innovation, technology solutions for lightweight composites, weight in mitigation tools and topics were discussed in detail by the experts of issues such as the future of carbon fiber reinforced composites. Congress; THY bplas, ENGEL Turkey, BASF, Krauss-Maffei, Kordsa Global, 3 and participated as a speaker specialist firms like AT Kearney. In addition, Bloomberg HT News Coordinator Ali Çağatay made a presentation titled Yıl 300 Year After 30 Years Later Ayrıca.
A panel was also held at the Turkish Plastic Industry Congress in the context of Strate Automobile Relief Strategies in Automotive Türk. The panel was moderated by Ömer Burhanoğlu, Farplas CEO. Mercedes Calculation and Simulation Engineer Okan Otuz, Tofaş Interior Design Manager Murat Ayhaner, Martur Automotive R & D Director Recep Kurt and Ford Otosan Manager-Body Technical Specialist Oğuz Özgen participated as speakers.
A new project for marine waste from PAGEV, which says “There is no small thing“
PAGEV, which pioneered the sector with its works on environment, has again achieved a first. Signed Operation Clean Sweep (OCS) or ıyla Good Sweep Operation ve protocol, which is implemented by the Association of Plastic Industries (SPI) and the American Chemistry Council (ACC). Operation Clean Sweep movement, whose main motto is dayalı No small ına, is a voluntary management program for plants using plastic materials.
Plastic products are produced by melting the plastic raw materials in the form of brass grains. This rice grain size and shaped raw materials produced in petrochemical plants; petrochemical plants, during the transportation or during the production of plastic products can be poured into the ground and small particles can be mixed into the sea through sewage. The OCS movement offers awareness, training and inspection services in order not to pose a danger to the marine life of plastic raw material particles that carry economic value. This year 25. Celebrating the year, Operation Clean Sweep has made significant progress in the plastics industry in terms of zero grain, small parts and dust loss. Thanks to PAGEV, the Turkish plastics industry has become a part of this international formation.
Speaking at the opening of the Turkish Plastic Industry Congress, PAGEV Chairman Yavuz Eroğlu said, oğlu Nowadays, the changes in many features such as design and functionality have reached remarkable dimensions. It is now expected to be a more comfortable, safe, fuel-efficient, functional and stylish design than a vehicle, low-priced, high-performance and environmentally friendly. The alternative material for the production of tools that can meet all of these demands is plastic. Plastic, which offers technological freedom and design freedom thanks to its versatile and flexible use; With its lightness, durability and recycling feature, it can meet the expected benefits of today's vehicles. In this direction, plastic usage rate in vehicles is increasing. 5 is now part of the total production of automotive plastics. However, we believe that we will increase this share in a short time thanks to innovation works in our sector. Ancak
Eroglu stated that this year's congress was a continuation of the automotive plastics theme, which was discussed in the congress held two years ago, and that the importance of plastics in air transportation as well as the importance of plastics in road transport has increased. The Japanese ilke ANA da airline has taken a new ground in this sense. The plane with 787 passengers from Tokyo landed in Hong Kong after an 240 hour. The aircraft was referred to as a ”plastic airplane Uçak. This is because the volume 4 of the plane is fiber-reinforced plastic in volume. The plane was mitigated by 80 with high-strength material. Thus, the Boeing 30 can fly to the longer range with 20 fuel savings, while the sky is less polluted by the 787. In addition, the body of this aircraft, riveted aircraft was announced to be more robust. The use of plastic by Boeing continued in 40 with its rival Airbus A2013. It's nice to see examples ... We hope we can perform these studies in Turkey, as the Turkish plastics industry we have the infrastructure to make that happen, "he ended his words.