What is Thermal Insulation? How is Indoor Heat Insulation Made? How to Make Exterior Insulation

What is Thermal Insulation? How is Indoor Heat Insulation Made? How to Make Exterior Insulation
What is Thermal Insulation? How is Indoor Heat Insulation Made? How to Make Exterior Insulation

One of the areas where you spend the most time and where you feel most comfortable is undoubtedly your home. In order to be more comfortable at home, you may need to take actions that will increase the comfort of the environment. One of the ways to increase the comfort of the living place is to ensure its suitability for hot and cold seasons. This is usually possible with thermal insulation.

What is Thermal Insulation?

Thermal insulation; It is a process to prevent the penetration of cold in cold weather and heat in hot weather into the house. Thermal insulation has an important role to save energy and increase the comfort of the living environment. This practice also plays a major role in reducing environmental pollution as it saves energy. If you care about saving energy in terms of both the environment and your budget, you can prevent environmental pollution while saving money with energy saving tips.

What Does Thermal Insulation Do?

Thermal insulation makes many contributions to individuals living in the house, nature and economy. Prolonging the life of the building, providing energy efficiency, protecting the environment and ecological balance, contributing to the family and country economy are some of them. Thermal insulation can minimize the undesirable effects of the freezing cold of the winter and the sweltering heat of the summer in the house.

It can help you save 50% on heating expenditure and cooling expenditure. ru that may occur in your hometubeIt can prevent mental illness and improve the health conditions of your environment.

How is Thermal Insulation Made?

Thermal insulation is divided into two as interior and exterior sheathing. Exterior sheathing is a process that starts with surface preparation. In the post-preparation process, steps such as placing the sub-basement profile, sticking the sheathing plates, doweling these plates, placing the corner profiles and creating the plaster layers are followed. Finally, paint is applied and the process is completed.

The question of how to make internal thermal insulation is also among those who are curious. For this, the steps applied in exterior insulation are followed, but unlike exterior sheathing, the materials used vary in terms of thickness, thinness and decoration.

General Insulation Recommendations for Flats and Rooms

Although the questions of how to make indoor thermal insulation and how to make indoor thermal insulation cause confusion separately, the process for both of them is basically the same. Generally, 1-2 cm of insulation is used for insulation in apartments and rooms, and various plaster materials are preferred. In order not to cause cracks in time, a quality plaster should be preferred for the plaster material to be used on the insulation. Generally, it is sufficient to insulate the northern facade of the building. This is a method that does not fully meet expectations. Because with this method, heat leakage may occur. To get the best efficiency, insulation should be applied to all four facades.

Floor Thermal Insulation Recommendations

The question of how to make floor thermal insulation is one of the questions frequently asked by those who want to have thermal insulation. For this, it is important to consider some recommendations. Thus, a more efficient floor thermal insulation can be obtained. Thermal insulation mats can be used under the parquet for floor thermal insulation. In addition, a thermal insulation barrier can be created under the existing screeds on the floor. For best results, the insulation on the floor can be reinforced with wall insulation. Thus, air flow that may occur from the wall to the floor can be prevented.

Ceiling Thermal Insulation Recommendations

The heated air rises and if there is no insulation on the ceiling, heat loss occurs. In order to prevent this heat loss, we must first answer the question of how to make ceiling thermal insulation. Ceiling thermal insulation is made with aluminum foil glass wool roof mattress. This mattress is laid on the floor and insulated. The mattress used during ceiling insulation should not be covered in any way. Since it is a non-durable material, pressure should not be created on it and it should not be loaded. Foil surfaces should be laid on the hot side and care should be taken to position this part in a way that it can breathe. Care should be taken not to let the air spaces in the fibers come into contact with water, in case of water filling.

Thermal Insulation Recommendations for Your Windows and Glasses

In the beginning, “How to make glass thermal insulation?” must answer the question. Heat-insulated glasses are double-glazed glasses and these glasses minimize air permeability. Thanks to these glasses, thermal insulation is realized. The question of how to make window thermal insulation is among the other things that need to be answered. Window heat insulation can be provided by making the necessary insulation in the frames. If the frame has sufficient insulation, but the glass is in a structure that does not have double glazing, glass replacement can also be made. If all the requirements are met but the air flow could not be prevented, it should be determined whether there is a problem in the window assembly and wedges should be applied if necessary. The problems caused by the inner parts of the window can be prevented by means of insulation tapes. At the end of all these isolation processes, you can keep your home at the desired temperature.

Similar Ads

Be the first to comment

Comments