How to Fix Unpainted Bodywork?

Paintless Body Dent Correction (PDR) is the technique and art of restoring body dents up to 5 cm in diameter, which occur on the vehicle bodywork as a result of external impacts, by correcting the car body dents up to XNUMX cm in diameter with special tools and without any painting process. Unpainted body dents correction process is the elimination of damages on the body parts of the vehicle without any damage to the body without the traditional methods of body correction and paint application.

If minor and large-scale parking damage does not damage the original paintwork of the vehicle, it is restored by means of special repair techniques.

Unpainted Bodywork Correction Process

It should be known that unpainted bodywork correction is a very common situation caused by some external impacts due to some external factors and has many solutions. Depending on the preference of less effective damages such as collapsing and crushing on the body of the vehicle, this is a method of restoring some of the tools specially used for this job or an application called massage method without damaging the vehicle's own paint. What is very important in these processes is seen as the very careful execution of these processes. The carelessly preferred method can damage the paint of the vehicle and create a significant decline in the market value of the vehicle.

Advantages of Unpainted Bodywork Correction

The reason why the unpainted body correction, which is preferred by vehicle owners in general, is very useful for vehicle owners, is that the original state of the vehicle is not damaged and therefore its value is not lost. Another advantage is that since no paint or paste is used, the color of the paint to be used with the vehicle's own paint is prevented from being different. And in addition to this, it is used by experts today as a very economical method.

How to Fix Unpainted Bodywork?

One of the processing methods is known as the correction by pressing the rear of the hood. Rod-shaped parts used at the rear of the collapsed part of the vehicle are used in the process of pressing from the rear of the hood. With these parts, it is applied to the depression with a massage method. If there is any external roughness occurring during this process, these roughnesses can be corrected by another process. In this method, the materials behind the damaged area must be removed.

Another method is vacuuming. This method is used in vehicles where the rear of the bodywork cannot be used. In this method, the paint of the vehicles is not damaged.

Another process method is known as magnetic applied method. This method is used today as a very effective method. In this process method, it is not necessary to remove the materials. It is a very time-saving processing method. It allows correction of the damage without damaging the paint at the damaged area with frequency waves. In addition, in this method, there are program features according to the location of the damage and these settings can be made.