SDGMNS Type Platform Wagon Project and Chassis will be purchased
TURKISH RAILWAY MACHINES INDUSTRY INC (TÜDEMSAŞ)
SDGMNS TYPE PLATFORM WAGON PROJECT AND CHASSIS ACCORDING TO THE TSI CONDITIONS will be procured under open tender procedure according to the article 4734 of the Public Procurement Law numbered 19. Detailed Information about the auction can be found down below:
Tender Registration Number: 2017 / 29702
1 of Administration
a) Address: KADI BURHANETTIN MAH. 58059 SIVAS CENTER / SIVAS
b) Telephone and fax number: 3462251818 / 4699 - 3462235051
c) E-mail Address: email@example.com
ç) The internet address of the tender document (if applicable): https://ekap.kik.gov.tr/EKAP/
2-The subject of the tender
a) Quality, type and quantity: 100 Quantity TSI Requirements Sdgmns Type Platform Wagon Project and Chassis
Detailed information can be obtained from the administrative specification contained in the tender document in EKAP.
b) Place of Delivery: TÜDEMSAŞ General Directorate-SİVAS
c) Delivery date: Contractor; The project will be completed within the 300 days following the contract from the concept design to the completion of the certification. Following the contract, the contractor will complete the serial production of the contractor railcar chassis at the latest 330 after the contract and will produce a weekly minimum of 6 wagon chassis to be delivered to TÜDEMSAŞ. If it can produce more than the minimum 1 wagon chassis, it will be able to deliver more chassis with the approval of TÜDEMSAŞ. The contractor; take the approval of TÜDEMSAŞ by the wagon chassis before the deadline specified in the schedule program. However, the contractor has to act carefully and sensitively in the procurement processes of the materials and parts belonging to him and it will take the necessary measures in a way that will not delay the termination program given above. Since the mass production of bogies will be carried out by TÜDEMSAŞ, the parts used in the production of bogie and which belong to the CONTRACTOR (bottom body, elastic sliding plate, parts of the hand brake, load sensor pipes on the bogie, etc.) are the 6 days before the mass production of the wagon chassis. (90 inspection certificate, Technical Drawing etc. according to TS EN 10204) will be delivered to TÜDEMSAŞ. Some of these parts can be delivered later by the approval of TÜDEMSAŞ according to the mass production program of the bogies.
a) Location: TÜDEMSAŞ General Directorate-SİVAS
b) Date and time: 07.03.2017 - 14: 00
Tender notices published on our website are for information only and do not replace the original document. The original document is valid for the differences between published documents and original tender documents. Our sources are Official Gazette, Daily Newspapers, Public Institutions and Institutions web pages.